Head Office
21710 Moortown Cir.
Katy, TX 77450
Phone: 281-579-3377
Fax: 281-579-8819
Mobile: 713-419-1498
Alu-Cut Logo
Manufacturing Plant
8516 Hwy 6 South
Houston, TX 77083
Phone: 281-495-2157
Fax: 281-495-1765
sales@alu-cut.com

PROPOSAL 2003-04-01
DOALL MODEL TF24
UNIVERSAL TILT FRAME BAND MACHINE
RECONDITIONED


Capacity
At 0° Square 24 x 24 in
Round 24 in
At 45° Rect. 24 x 12 in
Round 12 in
Vise - left and right side hyd. 12.5 in high, 24.25 in maximum opening, clamping force 2,450 lb.
Band length 17 ft 5.5 in
Band width 1.25 in x .042 in width
Band speed 50-250 fpm infinitely variable
Band feed Infinitely adjustable
Hydraulic power unit 20 gal. reservoir, 15 GPM
Coolant capacity 20 gal.
Band wheels 25 in dia. ductile iron
Work table 8, 4-7/16 in dia. rollers

Includes the following standard equipment

A.        Variable speed heavy-duty, hi-torque hydraulic drive.
B.        Zero clearance, spring-loaded, carbide-faced insert saw guides for 1-¼ in. saw band.
C.        Hydraulic frame tilting with electronic degree tilt indicator.
D.        Hydraulic guide post elevation.
E.        Full-cycle operation; head returns automatically after completing cut.
F.        Hydraulic band tension, factory set for high-speed steel saw band with safety limit switch.
G.        Coolant system with separate pump motor.
H.        One saw band.

Hydraulically powered infeed conveyor with joy stick control built in two sections of 10' each and one section of 5'. and an outfeed conveyor of identical design to that of the infeed conveyor with 8" centered rollers and 20' length

Manually positioned hydraulically raised and lowered work piece stop relative to the band saw blade adjustable from 2' ~ 24'.

The complete system has been totally rebuilt, substituting new components and updated control system as follows

Full PLC control of all machine functions with industrial touch pad control for all manual and automatic functions of the system.

Joy stick control of forward and reverse motions to conveyors.

System completely rewired.

New hydraulic manifolds with DO3 valving.

All hydraulic cylinders rebuilt with new seals and re-honed as appropriate.

All bearings and wearing slides replaced.

NOTE: the flat machine ways that the head traverses on have been replaced with ground slideways of T1 material having a hardness of 42 Rockwell C as opposed to the mild steel ways originally supplied.

All rebuilding and reconditioning work has been carried out under the supervision of an experienced ex-DoAll person.

Price                                                                $ 85,500.00    (replacement cost $160,000+)

Delivery                                                            4 weeks subject to prior sale.

Terms                                                               Net cash on delivery

Parts warrantee                                                12 months